Making a Central Heating System Energy Efficient

As one of the major energy expenses for your house, central heating is the area available for you to make significant changes that will save energy. Heating your home with a central source can cost about half, and sometimes, beyond half of your heating bill during the peak winter season. If you make your central heating unit more energy efficient; this way, you’ll get to save more money and even reduce the adverse effect of the system on the environment.

Double the amount of greenhouse gas emissions that comes from cars, that’s what we get from homes. When electricity is being produced for homes, power plants give off gas emissions. This is why we need to make combined efforts to minimize energy consumption to reduce the impact of families on the environment.

Digital Programmable Thermostats Save Energy

When you want to make sure your central heating system operates smartly, energy-wise, the first thing to do is starting with the thermostat. Reducing the temperature when you are away saves you as much as $180 per year off your heating bill. It costs nothing more than $100 to get a digital programmable thermostat, and the savings it provides will keep paying you back every month.

Avoid “Hot Spots” with Radiator Thermometers

An amazing way to avoid turning up the heat when one of the rooms in your home feels cold is by installing a radiator thermometer. Is your home heated with piping? Then you can have a room that is closer to the boiler or furnace. A shorter pipe distance from boiler gives a warmer feel in the room. On the contrary, rooms which are far away from the central heating system feel cooler unless the temperature is increased.

A way to tackle radiator hotspots is by installing radiator thermometers in all rooms. Doing this allows you to accurately read the temperature in your home and then prevent the flow to each radiator so as to get a more even flow to every room in your home. When a radiator requires less heat amount, it follows a dispersion of heat to other areas in your home. Don’t forget that inefficient heating systems like a 20-year old boiler or furnace can function 35% less energy-efficiently than a new unit with high efficiency.

Check Ducts for Air Leakage

If you use ductwork instead of piping, you may want to inspect for leaky ducts. Ineffective ducts cost 20% to 40% increase on your energy bill. Remove the insulations around the ducts and check for gaps (make sure you replace the insulation after completing the task). This is just a little energy-saving idea that will save you so much money.

Tax Credits for Energy Efficient Heating Systems

Homeowners should take advantage of the federal tax credit and advance to a more energy-saving central heating system. Tax credit reimburses 30% of cost of the heating unit and the installation, that’s about $1,500. A tax credit that’s energy efficient covers different types of heating systems, even heat pumps and furnaces.

Read More

Understanding HVAC Maintenance

According to a report by the Environmental Protection Agency (EPA), it is estimated that an average American spends about 93% of their life indoors. The report further establishes the fact that the quality of indoor air in circulation can be responsible for different breathing problems as well as skin problems. This fact is predicted on the notion that the level of pollution inside a building increases 2 to 100 more times than the level of pollution that exists outside of a building.

The importance of a working HVAC unit in the house cannot be over emphasized. Much more the HVAC unit must be in good condition in order for the thermal condition of the home to be well regulated. Hence, it is always important that the HVAC unit ne maintained periodically. Also an HVAC technician should be contracted for regular maintenance and repair if need arise. HVAC units are best maintained during the fall or spring. Maintaining your HVAC unit at this time is best. When you want to schedule an HVAC service and maintenance, contract an HVAC repair expert or company in fall or spring. This increases the lifespan of the HVAC system and promotes its efficiency. .Certain needs regarding your HVAC unit will need your immediate attention and quick action has to be taken to this issue. However there are other minor issues that can be looked at just once or twice a year.

The HVAC system helps to provide a comfortable and conducive indoor temperature by regulating the inflow and outflow of air as well as the way heat is distributed around the home. However, the HVAC system can only function effectively when it is properly maintained and serviced regularly. This is to ensure the smooth functioning of the HVAC unit.

Find below are 10 ways you can ensure the smooth functioning of your HVAC system and avoid it malfunctioning.

  1. Regularly clean the different parts indoor of your building. This is to avoid dirt and debris enter the unit. These small particles can affect the smooth functioning of the HVAC system. The surroundings should be regularly clean and tidy
  2. Let an HVAC expert advise you in the size and type of HVAC unit you should purchase.
  3. Ensure that at all times the temperature of your HVAC system is 78 degrees during summer and 68 degrees during winter.
  4. Don’t ignore the knowledge you can get on doing little maintenance and small repairs for your HVAC system in cases of malfunctioning.
  5. Avoid supplying water to the furnace humidifier in hot weathers. In winter, set the humid stat between 30% and 40% by turning the water supply on.
  6. Set the registers on your HVAC system, above 20%. This would help you avoid strain
  7. Carbon monoxide detector is expected to be replaced at least It is good to replace the batteries in once a year at least.
  8. Lastly, ensure your HVAC unit is always lubricated and properly lubricated improper lubrication can increase the friction of moving parts. This would generally reduce the efficiency of your system. This can lead to it wearing out sooner than expected. It is important that your HVACC unit is well lubricate periodically.
Read More


Installing a HVAC system in your office or home can be quite challenging. The challenge comes at different stages – from determining the system to buy and choosing the one best that suits you to installation by an experts and maintenance. However, out of these different stages, the first one that deals with determining the HVAC system that best suit one’s individual or corporate need is more challenging. This is because, it requires you to consider a whole lot of factors before settling for one finally. Hence, it behooves one to carefully consider the options available, from the specs to the brand of the HVAC system. You might as well the technical advice if an HVAC engineer to further make sound decision on the HVAC system that is best for you/

If you have been planning to purchase a HVAC system, and you have been having difficulty making your choice, this article is for you. Below are things you must consider before choosing an HVAC system.

  1. Brand Quality: No one wants to purchase a product that gives headache or worry over its long term efficiency from the point of purchase. When choosing an HVAC system to purchase, be careful to research properly on the brand that would not demand undue maintenance cost from you almost every time. The cost of maintaining an HVAC system can be quite expensive. Such expenses should not be incurred on the HVAC system unduly.  You must be able to trust the long time performance of the brand you are purchasing.


  1. Price: One of the first question an HVAC engineer most likely would ask you upon seeking their technical advice is what your budget is. You have to purchase within your budget, but you can spend a little extra, if that is what is required to get a quality system.



  1. Technology: As a customer, you would want to get 100% Value for your money. Find out the latest technology in the HVAC system, and scout for the HVAC system that has this feature. This might cost you extra, but you would not want to miss out also on the latest HVAC technology.


  1. Size: One very key factor in choosing a HVAC system is the size of the HVAC system compared to the size of your building. The size of unit must fit the size of your interior building space.



  1. SEER RATING: Lastly, one thing to always look out for in purchase of any product is reviews. The rating of an HVAC system is being conducted by different HVAC regulatory bodies, with the SEER rating being most popular. One of the criteria the SEER rating looks at is the energy-efficiency of the HVAC system. The SEER rating and other rating methods such as HSPF, AFUE, EER gives you the customer information on the quality of the HVAC system based on energy-efficiency, design, maintenance, and long term performance. The higher the rating, the more efficient and reliable the HVAC system


Read More